Introduction
The aim of this Reflective Learning Diary is to give you an opportunity to do the following:
· Keep a record of the work you undertake on your placement
· Note any existing skills you develop, or new skills you learn
· Identify areas you would like to improve
Recording session with the Atlantics
| Date: | |
| Hours worked: | 8 hours (9am – 5 pm |
| Tasks completed: | · Setting up of the studio in readiness for the arrival of the artist · Setting up of the mixing desk, creating a rough mix of the artists work. · Overdubbing tracks were required by the artist · Making the environment of the recording studio feel comfortable and relaxed. |
| Reflection: | This was my first professional experience of working within the studio environment with a professional band, I felt quite nervous, I didn’t quite know what would be expected of me, but I understood that the manner I would present myself to the artist would aft to be a professional one. The Atlantic’s are a 1950’s Rock N Roll Band that perform their own material as well as cover versions of 1950’s Rock N Roll Classic’s. The aim of this recording session was to correct minor faults that had occurred in the previous recording session. This session involved rerecording sections of the songs that the band was unhappy with. These over dub’s involved rerecording of the saxophone, acoustic guitar, cymbal crash’s and vocal arrangements to certain songs Myself and Clint Hollinson were asked to sit in on a recording session with Producer Digby Smith at the Music Mill, this session was the second recording session that Digby had had with Rock N Roll Band “The Atlantic’s”. We decided to split the session between us, Clint would take the position of engineer and operate the recording equipment for the first half of the session and I would act as studio assistant. Engineer An Engineer is responsible for the running of the recording equipment, reloading songs from the computers hard drive, patching dynamic & effects processors to the mixing desk and taking session notes. Studio Assistant An Assistant is responsible for setting up equipment within the live room this could included microphone application & positioning as well as signal routing to the mixing desk in the control room. The Session We started the session with Clint loading up the Atlantic’s tracks from the hard drive whilst I set up a JM47 in the live room, we were going to over dub a couple of the saxophone parts that the band weren’t happy with on various songs, this involved loading the song outlining the section to be over dubbed and recording over the mistake. This procedure was carried out at least 3 times. Once the band were happy with all of the saxophone edits that they had made within the tracks, we then moved onto the next recording, this recording would be an intro to the next song, this involved setting up a JM27 condenser microphone in the live Room and positioning the microphone accordingly, to how the artist was going to perform. The instrument used to record the intro for this track was an Acoustic guitar. The next recording to take place in the session was a series of vocal arrangements over dubs; these could be additive harmonies or replacement vocals, or even vocal parts that were unable to be performed during the first recording session. Once all of the vocals were recorded the producer decided that it was time for a break, during this break Clint and myself swapped roles and went through the session notes, this enabled us to judge what equipment was needed within the live room and which songs were left to work on. The process of overdubbing was carried out for the rest of the session these over dubs were an addition of a cymbal crash to one track and a bass line additive to a second track, when the bass line was added and played back it was noticed that there was still a bass note that was out of tune, this note didn’t belong to the double bass part, in-fact the stray bass note belonged the piano part, this part would aft to be rerecorded at a later date as the keyboard player was unable to attend the recording session. Under the guidance of producer Digby this session seamed to run effortlessly, the direction that was offered creatively to both the artist and to us as studio staff was priceless. Simple tips of how to position microphone and how to choose a specific type of microphone for the application. During the session when we were setting up for the acoustic guitar takes we came across a condenser microphone that the diaphragm had become damaged, I didn’t notice the microphone was damaged until Digby pointed out the extreme difference in sound quality, to enable us to determine this we compared the damaged microphone against an identical microphone. If we hadn’t noticed this factor of the microphones poor sound quality, this could have impacted on the recording session and led to the acoustic guitar parts having to be recorded at the cost of the studio.
|
End of placement evaluation
| The achievement of which I am proudest is: | I found that I achieved a better understanding of how to make your artist feel at ease, whilst capturing the performance in the recording. |
| The thing I found most surprising was: | Due to my lack of knowledge of the recording environment on a professional basis, I found the session to be well structured. The ease that we were able to capture the performance without having to rerecord the same parts over and over again as is the case with the students within my course. |
| The area I found most challenging was: | I was giving the opportunity to control the Digital recorder by the producer, under his supervision I was able to drop in the artist at the correct parts and area’s of the recording. |
| The area I would like to improve is: | I would like to spend more time on working on the setting up of the mixing desk and setting up the mix, although I did set up a rough mix this was tweaked by the producer. |
| An example of when I worked in a team was: | The whole of working within a recording studio environment is based on teamwork, from the producer communicating to the engineers and then to the assistants. An example of this would be the producer asking for the assistant to set up a new microphone for the next recording. |
| An example of when I used my knowledge was: | I used my knowledge of microphones to record the acoustic guitar; the producer also approved my selection of microphone. |
| An example of when I solved a problem was: | By listening to the acoustic guitar in the live room I was able to determine the first microphone that I had set up was damaged, this was resolved by replacing this microphone with an Identical microphone. |
| An example of when I was given responsibility was: | As I have said previously I was given the responsibility of operating the this digital recorder, I found this to be one of my biggest achievements to be given the responsibility in the professional environment. |
| Other comments: | Although I didn’t have much professional experience of working with external clients in the recording studio I found the session with the Atlantics to be very educational, I have learnt many new technique’s I have learnt how to record and mix a session although it be under the supervision the producer, I also feel that I have made a good impression with the staff at the Music Mill with my Professional attitude. |

No comments:
Post a Comment